Part Number:  AR-BB920...Barrel Band type front sight base for AR match rifles. Has aprox. 1/2" of stepped repeatable elevation thats adjustable, integral level and dovetail base. With a .922" diameter hole to fit Krieger barrels and accepts bushings reduced to fit smaller barrels.... $100.00 Part Number:  AR-BBB...Bushing to reduce above bore.... $8.00 Part Number:  AR-BBASIC...Same as above AR sight base without level, and the elevation adjusts without steps (non-repeating).... $75.00 Part Number:  AR-RSB....Cant adjustable rear sight base. Allows you to rotate the rear sights in the same plane, to eliminate windage changes from yard line to yard line.... $75.00

The bases are made to off-set sights to side for use with the opposite eye for normal right handed left eye or left handed right eye.....$200.00/ BARREL BAND FRONT SIGHT BASES (Clamp on front sight base clamps around muzzle for bolt action rifles)/ BB-812...Barrel Band for .812” muzzle with integral dovetail.....$30.00/ BB-750...Barrel band for .750” muzzle.....$30.00/ (available with or without the dovetail)/ BBE-750 or BBE-812...Adjustable elevation barrel band.....$65.00/ SIGHT EXTENSION TUBES AND ADAPTER COLLARS This is a 2-part arrangement. The “adaptor” is first clamped onto the rifle’s muzzle, requiring a .001-.002” slip fit for proper functioning. Next, the “tube” is inserted into the front of the “adapter”, the “tube’s” index pin is then aligned into the corresponding slot in the “adaptor”. Finally, the “tube” is rotated counter-clockwise against the inside of the slot and the adaptor” is clamped around the “tube”. The “tube” has a male dovetail cut on it’s top that will accept the newer Anshcultz 1900 series front sight. It is also drilled and tapped for standard front sight bases, it can also be altered to accept an AR15/10 front sight base. ADAPTORS ET-ADP...Available in standard size of: .750” .812”, & .875”.....$40.00/ ET-RPA...Bushing’s to mount to RPA ladder front sight on tube.....$25.00/ (Specify color, see color chart for available colors)

AR-RFSB...Fixed Rear Sight Base for flattop AR's simply clamps anywhere along flattop, accepts Warner & Redfield type sights..... $50.00

AR-BBRPA...clamp-on front sight base to allow the use of standard RPA ladder front sight on an AR match rifle. It is bored to .922" and uses the same AR-BBB bushings as above..... $65.00

FS-LR………………………………$125.00   A ladder type adjustable front sight that uses bushings to mount on any muzzle diameter up to .922”. The mount bracket is clamped to the barrel, where it can remain. The reinforced 22mm or 18mm sight tube is attached to the ladder. The ladder can be removed from the rifle for: Adjustment, Safe storage, or mounting to another rifle. The removable ladder provides 65-minutes of elevation,  in 5-minute steps.   FS-LRM: Mounting bracket only (w/bushing)….$50.00